Beach Towel Bag Tutorial

Beach Towel Bag Tutorial....

Supplies:

• 1 Beach Towel (I bought the cheapest at Walmart)
• 5 yards gros grain ribbon (just to be safe)
• Sewing machine
• Thread to match ribbon

Step #1- Fold the towel in half

Step #2- From the open side, measure in 22" and cut the towel (You are essentially cutting out the center of the towel. The excess that you cut off will make a pocket for the front of the bag) Step #3- Turn the towel and cut off about 4-5 inches of one side of the towel (otherwise the bag is just TOO big). You may want to serge or zig zag stitch any of the unfinished edges of the towel. Step #4- Now take the excess piece that you cut out of the center of the towel. This is going to be a pocket. The top of the pocket is going to be one of the edges that is already finished. From that end, measure down 18" and cut the other edge off. Step #5- Take the pocket and place it on one of the pieces of your bag. You will want all of the finished edges to be at the TOP of the bag. You will want your pocket to be about 5-6 inches down from the top of the bag. You are going to sew ribbon over the sides of the pocket so that none of the unfinished portion will show. Pin the pocket into place. Step #6- Sew the pocket onto the bag. Do NOT sew the top of the pocket (or you won't be able to put anything in your bag:) (I had a little excess on the bottom that I had to cut off only because I wanted the pattern to match up) Step #7- Place right sides of the towels together and pin just the bottom of the bag.

Step #8- Sew the bottom of the bag... do NOT sew any of the sides or the top.  You still want to be able to open it up fully to attach the ribbon. Step #9- open your bag up and lay it front side up on the floor or on a table. Step #10- Pin your handles all around your bag. I made the actual handle part of the bag 32". You will want to make sure the ribbon covers the side of your pockets. Step #11- Sew right on the edge of your gros grain ribbon... sew both sides. Step #12- Fold the towel right sides together. Step #13- Sew down the side of your bag (starting at the top) until you are about 6-8 inches from the bottom of the bag. Step #14- Open up the part you didn't sew and ... ...put that part together. Step #15- sew the open part together. (I hope these pictures make sense) Do this on both sides of the bag. It just makes a flat bottom to the bag. Step #16- Flip your bag right side out and you will have an awesome bag to take to the pool!!! Please feel free to email me at twiddlethumbs@rocketmail.com if you have any questions.

-Anisa

1 Craft 3 Ways- Travel Bag!!!

For our 1 Craft-3 Ways this month we decided to do some type of bag that you could use on a vacation. I have always wanted a HUGE swimming bag. We go swimming a lot and I need a bag big enough to hold 5 towels, 5 swimming suits, cover ups, life jackets, toys, etc..... that's a lot of stuff! So, when Angie made her placemat purse, I thought I could kind of do the same thing with a beach towel and make a BEACH TOWEL BAG. It took a little trial and error because the first bag a made was just tooooo huge. But I think I have perfected the process.

Look for my tutorial on how to make this awesome bag on Wednesday!! -Anisa

>><<

This little baby has been on my craft to-do list for sometime.

I knew it would be the perfect little tote for vacation for my kids (and me too). Then I started seeing little reusable sandwich bags popping up here and there. A perfect match. A water bottle holder paired with a reusable treat bag. LOVE it. I got the tutorial for the holder here at Pink Chalk Studio (via Ucreate). The treat bag is of my own design. (Hey-sometimes reinventing the wheel is much more fun than following the directions.) In order to make it day-out friendly, I attached some grommets (a.k.a. eyelets) to both the treat bag and the holder and fastened them together with a key ring (the kind that pull open). Now the kids can carry their own water AND their own snack. Brilliant!

Watch for a tutorial soon on making your own reusable treat bags!-Ang

>><<

I had no idea what I'd do for a travel bag until my friend Rachel mentioned she liked a bag that another friend had and that she'd love a similar one herself for a writer's conference attending. Like a true crafter I blurted out: "We could make that!" and I did. I got the original concept from this pattern, but enlarged it somewhere in the 25-30% range. I also designed interior pockets to fit the user's purpose better. (If you'd like clearer pattern instructions that the link, email us and I'd be happy to provide them.)

The finished bag was about 18" x 13", enough to fit legal length writing pads and a larger laptop. The hidden closures were also my design (along with some other cosmetic changes). Buttons are sewn to the main body of the bag and coordinating button-hole straps are sewn on the inside of the flap. Being only my second challenging sewing project, I'm pleased it turned out so well and as requested: serious on the outside, fun and girly on the inside! --C

Waterproofing My Kids

My family has been planning an awesome road trip for the end of summer. Two weeks on the road, DVD players, salty sea air, fresh fish, GORGEOUS scenery, and rain. The problem? We're desert dwellers. With the exception of the strange rainy season Salt Lake just experienced, we don't do rain. Not that we don't like it. We do. We just have no protection from the wetness besides an umbrella (or rain-brella as my 2-year-old calls it). As our vacation has a great possibility of being damp for a good portion of the time, I figured my kids will need rain jackets. Luck was on my side. I found these adorable little rain coats at Target (on clearance even!). I got them home and made my kiddos try them on immediately. Sadly, the jackets were too short in the sleeves on two of my 3 kids. Here's how I solved my problem for about $1 per jacket. The jacket: I bought 2 different colors of ribbon (by the yard-1 1/2" wide on both pieces). Measure around the cuff of the sleeve and add a little for your seam.** Since I was using 2 pieces of ribbon, I glued them together using my favorite glue, E6000. Starting at the inside seam of the sleeve, I glued the ribbon all the way around. Add a little embellishment. That's it. When I showed my hubby after one sleeve, he didn't realize I was showing him the "finished" side. He was amazed. (And why shouldn't he be?? ;) ) The best part is it fits her!! **To give your grosgrain ribbon a finished look on the raw edges, I used a propane lighter (like the ones for your grill) to burn the edge. No more fraying!

The world is a book and those who do not travel read only one page.

In my own haste to get ready for a first-time trip to New York City, I forgot to add our brand-new feature to the blog. Before you read the rest of this post, take a gander over to the top of the left column to see our new Creative Concept corner. Sometimes, you just need a small word or idea to send you into a great creative mindset. This month the theme is: travel. So many of us have recently traveled or are about to go on our summer vacations and there are a lot of ways crafts can make your trips easier or more fun.

This very theme inspired my craft for today. It was also inspired by an odd book called The Big-A** Book of Crafts by Mark Montano, pages 142-143. The author says to laminate a color copy of a map, cut it to the desired size, punch a hole in the corner, thread a key ring through it, write your info on the other side.

It sounds easy, but I think I've made it even easier (and less sharp around the edges).

I used these great easy-to-use Photo Laminating sheets from 3M.

I printed off a map of where we spent our recent vacation from Yahoo. I wrote my info on the reverse side and even added the quote I put in the title of this post. I glued the map and info back to back and slipped it into one of these sheets. Easy! I then cut a small slit in the top and threaded an unused hair elastic through the slit to attach it to my luggage. I even added a small ribbon for good measure and to cover the metalic connector on the elastic.

The finished product:

-C

All out of Mod Podge....

This week has been rainy and cold.... I've had sick kids and I've been cooped up in my house most of the week:(  So, I thought I'd skip showering and work on some crafts.  Unfortunately I ran out of Mod Podge but I couldn't drag my sick kids to the store in the rain.  So, I thought I'd post a really cute GIRLY scrapbook layout I got to make of my niece.  My sister-in-law was sad that she didn't win my scrap a page contest so I told her I would scrapbook a page for her anyway.  It was a win win situation because I don't have any girls and it was soooo fun to scrapbook a girl page.  (I have tons of girly scraps if anyone wants to use them).

I used this layout from Elizabeth Kartchner as my inspiration.  I loved the way it turned out and it was soooo much fun... thanks for letting me scrap these Shellie!

Stay tuned for all of my Mod Podge projects when I get to the store!!!

-Anisa

Quick Felt Checkbook Cover

I was getting tired of the checkbook cover that came with my wallet. Not only was it a boring taupe, but that taupe also acted as a type of camouflage, constantly preventing my husband from being able to find it. He won't have trouble finding it now! I used that old taupe cover as a template to cut out my felt. I kept the width the same, but increased the length a bit to allow for folding it in half, etc. The embellishment is just embroidery and a bit of applique. It took me just over twenty minutes of actual work to make this happen.

Waterproof a Blanket

So, here's a funny story for you. We went camping over Memorial Weekend.  On the drive there, it started to rain on us.  When we got there to set up camp, it stopped raining, but the ground was wet.  So I pulled out my waterproof blanket to set the little ones on.  As I was cleaning up camp to go to bed, I thought I'd pick up the blanket and turn it upside down over the tailgate of the truck so that the back side (the waterproof side) could dry.  Well, that night it rained and poured.  The next morning all of our camp chairs that we had left out and everything else we owned was WET.  But not my waterproof blanket.  I turned it back over and had a dry place for the

 little ones to sit!

So, here's how I made it.... I got the idea from Little Birdie Secrets here, but I made my own modifications.

Supplies....  

• vinyl table cloth (60x84)
• lots of old pants for quilt top
• 4 yards of flannel for quilt bottom
• 2 pkgs heavy duty snaps
• twill tape
• hammer.... I have to say that I tried using the setting kit that came with the snaps and I found my scrapbooking tools for eyelets to work much better.

1. I cut out 88 8" squares from old pants I had been saving.

2.  I sewed them together 8x11 squares. (this made my quilt 64"x88" -seam allowance)

3.  I bought 4 yards of flannel for the back and sewed that together. (that made it 72x90" so I had to cut a little off)

4.  I laid the flannel face down on the carpet and laid my quilt top face up on that.  

5.  I trimmed the flannel about 1.5 inches longer than the quilt top all the way around.

6.  I turned the flannel over twice and pinned it.

7.  I machine bound the edge of the quilt.

8.  I sewed a few random X's through the squares of the quilt to hold it together when washed.

9.  I bought a rectangle vinyl table cloth to  snap to the quilt.  I used twill tape everywhere I put the snaps to reinforce the table cloth.

10.  I bought heavy duty snaps and adhered them to the table cloth and quilt.

The best part about this is that I can use the table cloth as an actual table cloth and I can use the blanket without the waterproofing.  I just wipe the table cloth off and I can wash the blanket in the washing machine.

Another thought I had was to just buy a vinyl table cloth and a cloth table cloth and snap the two of them together.

-Anisa

Sweet Little Tissue Holders

I love these little tissue holders and have wanted to make one for some time. I found a super easy tutorial on Skip to My Lou. Honestly I used the tutorial once and didn't need it again. So easy. Here's mine: Cut 2 pieces of fabric 6 1/2" x 7" each and iron Place right sides together and sew around the edges using a 1/4" seam. Be sure to leave a 1 1/2" opening for turning. (I'm sorry about the poor quality of the above photo. They get better.) Turn out and use your scissors to help push out the corners. Iron again. Fold edges in towards the middle. Allow them to overlap about 1/4" Sew 1/4" seam down both sides. (This will close your gap from turning it right side out.) Turn right side out. Add embellishments if you a little extra. Fill with travel tissue pack. How simple is that?! Love it!